| Tokyomods Engine Stand System |
| It's finally here!! The New!! Tokyomods Engine stand system. |
|
|
|
|
|
Complete Tokyomods Engine stand system including:
Bench mount and Roll stand
Price: $859.95 |
| |
|
| |
|
Bench mount system $299.95 |
| |
|
.
|
Bench Mount Oil Tray $174.95 |
|
|
| |
|
|
Optional roll stand $599.95 |
| |
|
|
| Crankshaft Seal Installation Tool |
| Our stainless steel precision machined crankshaft installation tool will minimize the disturbance on your oil seal when installing the crankshaft. This tool fits Honda CRF250R/X and CRF450R/X. |
|
Price $49.95 |
|
|
| Tappet Tool Set |
| These tools are heat treated, and chrome plated for durability. Sold as a set which includes three wrenches - 8mm, 9mm & 10mm and three screw type adjusters - 3mm and 4mm square. The adjusters interchange with the wrenches to allow for 9 different combinations to fit most applications. Graduations on adjusters allow mechanics to adjust valves much quicker. Fits nearly all models of Honda & Suzuki motorcycles and ATVs with screw type adjuster as well as Yamaha SR 185/250, XT/TT 250 & XS 400. |
|
Order Number: 950-TKY- 440 |
Price: $ 49.95 |
| |
|
| Keihin/Mikuni Main
Jet Wrench |
With this plastic wrench, you will be
less likely to strip your threads. |
|
Order Number: 002- TKY- 401 |
Price: $2.95 |
| |
|
| Positive Stop TDC Tools |
The only accurate way to find TDC! |
|
Order Number:
950- TKY-235 10mm TDC Tool
950-TKY-236 12mm TDC Tool
950-TKY-237 14mm TDC Tool |
Price:$24.95 |
| |
|
| Pilot Screw Adjusting Tool |
|
| This new pilot screw adjusting tool was designed to fit into those tight areas on multi-cylinder and single cylinder motorcycles. This unit features a 1" angled head for those hard to reach pilot screws. Length is approximately 17" with a flat slot blade tip. |
Order Number: 950-TKY-406 |
Price: $34.95 |
| |
|
| Pilot Screw Adjusting Tool |
Precision made of aircraft grade aluminum & stainless steel. Designed for hard-to-reach areas and pilot air screws on inline fours. Gear Driven 1/4” hex drive
Includes five 1/4” hex bits (all .5” long)-Straight-slot, Phillips, R-shaped pilot screw bit, 6mm hex jet bit & 1/4”-hex-to-1/4”-drive bit. Can be used with any 1/4” or 6mm hex bits.
Max torque is 50 in. Lbs. 17.5” long. |
|
|
Order Number: 950- TKY- 478
|
$99.95 |
| |
| |
| Tokyomods Honda Camchain Tensioner Tool |
| This is the finest tool on the market for removing and installing stock automatic camchain tensioners on Honda CRF250, CRF450 and TRX450 models. |
|
$139.95 |
|
|
| MOTUL |
|
| |
ENGINE OIL: MOTUL 300V 100% Ester synthetic 4-cycle oil for use in highly modified engines. Running oil temp up to 365F. MOTUL 7100 100% synthetic, very high film strength to protect engine and gear box. MOTUL 5100 Synthetic blend handles high loads and running temperatures. |
|
|
TRANSMISSION OIL: TRANSOIL EXPERT is fortified with extreme pressure additives and heat dispersants. Better shifting, less friction and more power to the tire. |
|
|
ENGINE COOLANT: Protects the entire cooling system against corrosion. Ready to use, no mixing necessary. Factory coolant has higher boiling point for race engines.
MoCOOL: Radiator additive witch will reduce cooling system temperatures by as much as 30F. |
|
|
MOTUL BRAKE FLUID: RBF660 PRO RACING BRAKE FLUID: The new standard in high-performance racing brake fluid Mixes with DOT 3, 4, & 5.1 (NOT DOT 5). Boiling point 617F, wet 399F. RBF600 BRAKE FLUID: The ultimate performance brake fluid. Mixes with DOT 3, 4, & 5.1 (NOT DOT 5). Boiling point 594F, wet 421F. DOT5.1 BRAKE FLUID: 100% Synthetic. Mixes with DOT 3, 4, & 5.1 (NOT DOT 5). Boiling point 509F, wet 365F. |
|
|
MOTUL SHINE & GO. Shines and revives the color of plastics. Leaves a protective film. Prevents dust and mud from sticking. |
|
|
|
